Recommended Cleaning Schedule; Daily Cleaning - MTI AUTOFRY -40E Operator's Manual

Hide thumbs Also See for AUTOFRY MTI-40E:
Table of Contents

Advertisement

Recommended Cleaning Schedule

IMPORTANT
To ensure compliance with state, local and national health and safety
standards, regular maintenance must be performed. Proper maintenance is
important for your AutoFry to continue to operate without the need for a
hood and duct system and it is important for the health and safety of your customers.
Regular oil changing, as part of your regular maintenance, will enhance the taste of your food product.
Oil changing will vary widely depending on the use of the AutoFry. The use of a shortening monitor kit is
the most accurate means of determining the status of the oil.
Visit
www.AutoFryWebStore.com

Daily Cleaning

1.
Remove and wash the following in warm soapy water followed by a clear water rinse:
Teflon cook baskets
Food entry chutes
Food service baskets
Filter cover plate
Grease baffle
2.
Thoroughly dry all parts.
3.
Remove the charcoal filter and wipe down the exterior surfaces with a clean damp cloth or
paper towel.
NEVER SOAK THE CHARCOAL FILTER OR PERMANENT DAMAGE
4.
Clean all interior surfaces to bare
metal.
Use extreme caution when cleaning around the
fire system actuation cables and fusible link in
the interior cabinet. Accidental discharge of the
fire system could result. Figure 8.
5.
Sanitize all parts and interior surfaces.
6.
Polish the exterior surfaces using AutoFry shine stainless steel polish and a soft cloth.
7.
Replace the clean dry components and add liquid shortening as needed.
MTI-40E OM 02/17 Rev B
AutoFry
MTI-40E Operator's Manual
for different Oil Filtration options!
TO THE CHARCOAL MEDIA WILL RESULT.
17
63-0009B
Figure 8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AUTOFRY MTI-40E and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents