Svantek SV 977D User Manual page 162

Project Position enabling selecting the catalogue in the
instrument memory which contains Area catalogues.
Position enabling selecting the catalogue in the
Area
instrument memory which contains Source catalogues.
Source Position that enables selecting the catalogue in the
instrument memory which contains files with STIPA
measurement results.
Averaging Type of STIPA results averaging: Manual or Auto.
Standard according to which STIPA averages will be
Standard
performed in the automatic mode: IEC 60268-16x2 or
IEC 60268x3.
Index Results to be displayed: STI or CIS.
Source Adjustment of the reference STIPA signal level to the
Calibration level of a real voice signal in the tested area.
Ambient noise Screen that enables setting the ambient noise distortions
in the way of sound pressure in the 1/1 octave bands with
central frequencies from 125 to 8000 Hz. This screen is
connected with the STIPA function.
Alarms Instrument's function, enabling alarm setting, generation
and alerting. The alarm setting can be done through the
SvanPC++ software. If Alarms were defined the they can
be seen in the instrument's screens. Some terms, used
in the SvanPC++ software, are presented below:
SV 977D User Manual
Chapter
13.4.4
Chapter
13.4.4
Chapter
13.4.4
Chapter
13.4.4
Chapter
13.4.4
Chapter
13.4.4
Chapter
13.4.4
Chapter
13.4.5
Chapter
162
4.11