Advertisement
b) Insert the arm into the exhaust air outlet. When installing a single arm, cover the unused outlet with
the appropriate cover.
5. filter hood battery: Open the battery compartment cover (b) and insert the battery properly. The hood
is switched on at the LED switch (a).
6. Ready! To remove the HEPA filter, the housing must be unlocked (a). Use the two white tabs to
remove the activated carbon filter.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 91934
Page 9
04 2023-1
Advertisement
