Download Print this page

WilTec AOYUE FEK-01 User Manual page 3

Solder smoke absorber with led lights

Advertisement

Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
Before using the device for the first time, read the manual and familiarise yourself with it; otherwise,
there is a risk of serious damages nad/or injuries.
Warning!
Remove all packaging parts and plastic films.
Do not stretch the holding arms of the device too far. The device could tip over.
When inserting the HEPA filter into the device, make sure that the filter is inserted in the centre
of the device. Also respect the note "THIS SIDE UP" and the corresponding arrows.
Before removing it from the packaging, check each component for integrity. If you suspect dam-
age, do not use the device and contact the dealer.
Set the main switch to "OFF" and unplug the power cord from the socket before transporting the
unit.
Do not hit or step on the device or its components. Do not drop them and be careful not to
subject them to any other type of shock. Do not put the device down abruptly and with a violent
movement.
Contains fragile components! Risk of damage!
Make sure that the device is always earthed. Only connect it to an earthed socket.
If the device is not used for a long period of time, the mains plug must be unplugged. If possible,
switch off the device when you take a break.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Fire hazard!
Item 91934
Page 3
04 2023-1

Advertisement

loading