Advertisement
Quick Links
Instructions for Use
Ash Vacuum Cleaner
ZD99-Serie
ARTICLE 50580
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 1
http://www.wiltec.info
Advertisement
Related Manuals for WilTec ZD99-Series
Summary of Contents for WilTec ZD99-Series
-
Page 1: Instructions For Use
Technical changes reserved! Due to further developments illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 1 http://www.wiltec.info... - Page 2 The user is responsible for complying with the location specific safety and mounting regulations (you can ask an electrician) • In case of device failure the repairs can be carried out only by an electrician or by the WilTec- repair service © by WilTec Wildanger Technik GmbH Seite 2 http://www.wiltec.info...
- Page 3 If the filter is completely clogged while using, the engine switches off automatically due to overheating. In this case turn off the device, unplug the cable and clean the filter thoroughly. • The engine starts automatically, once it is cooled (after ca. 30 min.). © by WilTec Wildanger Technik GmbH Seite 3 http://www.wiltec.info...
- Page 4 Usually bad power suction is attributed to the fact that, while vacuum cleaning, outside at the primary filter a layer of ash crust has been formed and the device is not properly ventilated. Clean the filter. © by WilTec Wildanger Technik GmbH Seite 4 http://www.wiltec.info...
- Page 5 Washing it by hand with clean, warm water is no problem. • How often do I have to change the filter? The changing of the filter depends on its use and maintenance. © by WilTec Wildanger Technik GmbH Seite 5 http://www.wiltec.info...
- Page 6 All Wiltec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.
-
Page 7: Ec Declaration Of Conformity
When evaluating the product according to the EU demands, the following standards were applied: EN 60335-1:2002+A11:2004+A1:2004+A12:2006+A2:2006+A13:2008 EN 60335-2-2:2003+A1:2004+A2:2006 EN 62233:2008 If the product is changed this declaration loses its validity. Eschweiler, 15. December 2009 __________________________ Bernd Wildanger Manager © by WilTec Wildanger Technik GmbH Seite 7 http://www.wiltec.info... - Page 8 When evaluating the product according to the EU demands, the following standards were applied: EN 55014-1:2006 EN 55014-2:1997+A1:2001+A2:2008 EN 61000-3-2:2006 EN 61000-3-3:2008 If the product is changed this declaration loses its validity. Eschweiler, 18. December 2009 __________________________ Bernd Wildanger Manager © by WilTec Wildanger Technik GmbH Seite 8 http://www.wiltec.info...