Advertisement
Quick Links
Operation Manual
Nass- Trockensauger 1600 W
62641
Similar to image, may vary depending on model
Read and follow the operating instructions and safety information before use.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ slightly.
Advertisement
Related Manuals for WilTec 62641
Summary of Contents for WilTec 62641
- Page 1 Operation Manual Nass- Trockensauger 1600 W 62641 Similar to image, may vary depending on model Read and follow the operating instructions and safety information before use. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ slightly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
-
Page 3: Safety Notes
Do not lift the mounted device upright by its handle. There is a danger of material damage. • The multi-functional cleaner must only be connected to a socket with an according earthing. © by WilTec Wildanger Technik GmbH Artikel 00000 Seite 3 http://www.WilTec.de... - Page 4 Suction power negative pressure ~ 18 kPa Content of Delivery Name Amount Wet and dry vacuum cleaner Hose Telescopic bar Floor brush Round brush Crevice nozzle Operating manual © by WilTec Wildanger Technik GmbH Artikel 00000 Seite 4 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
- Page 5 The wet and dry cleaner has a double intake system, which enables the use in various areas. The upper intake (pic. A) is designed for the use as a wet cleaner or for the automatic vac- uum cleaning. © by WilTec Wildanger Technik GmbH Artikel 00000 Seite 5 http://www.WilTec.de http://www.aoyue.eu...
- Page 6 Please unwind the cable entirely when using the device. 7. Storing the Equipment On the upper side of the device, are two intakes in which the equipment can be stored. © by WilTec Wildanger Technik GmbH Artikel 00000 Seite 6 http://www.WilTec.de http://www.aoyue.eu...
- Page 7 15. Cleaning the Equipment and the Connections Remove the equipment needing to be cleaned and clean it thoroughly under running water. Then, mount the it back to- gether or store it in the designated intakes. © by WilTec Wildanger Technik GmbH Artikel 00000 Seite 7 http://www.WilTec.de http://www.aoyue.eu...
- Page 8 Close it and place it back again. 24. Emptying the Water Container Remove the upper part of the cleaner and remove the dirty water. Clean the water container with clean water. © by WilTec Wildanger Technik GmbH Artikel 00000 Seite 8 http://www.WilTec.de http://www.aoyue.eu...
-
Page 9: Disposal Regulations
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with domestic waste.