Download Print this page
WilTec 62641 Operation Manual

WilTec 62641 Operation Manual

Wet/dry vacuum cleaner 1600 w
Hide thumbs Also See for 62641:

Advertisement

Quick Links

Operation Manual
Wet/dry Vacuum Cleaner 1600 W
62641
Similar to image, may vary depending on model
Read and follow the operating instructions and safety information before use.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ slightly.

Advertisement

loading

Summary of Contents for WilTec 62641

  • Page 1 Operation Manual Wet/dry Vacuum Cleaner 1600 W 62641 Similar to image, may vary depending on model Read and follow the operating instructions and safety information before use. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ slightly.
  • Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
  • Page 3 Do not lift the mounted device upright by its handle. There is a danger of material damage. • The multi-functional cleaner must only be connected to a socket with an according earthing. © by WilTec Wildanger Technik GmbH Item 62641 Page 3 http://www.WilTec.de...
  • Page 4 Suction power negative pressure (kPa) approx. 18 Content of delivery Name Amount Wet and dry vacuum cleaner Hose Telescopic bar Floor brush Round brush Crevice nozzle Operating manual © by WilTec Wildanger Technik GmbH Item 62641 Page 4 http://www.WilTec.de http://www.aoyue.eu 2022-1 http://www.teichtip.de...
  • Page 5 The front intake (fig. B) is for the use as a wet cleaner. The connection not used must be closed off with a cap. © by WilTec Wildanger Technik GmbH Item 62641 Page 5 http://www.WilTec.de...
  • Page 6 The intake for the mains cable is located under the push handle. Unwind the cable entirely when using the device. 7. Storing the equipment On the upper side of the device, there are two intakes to store the equip- ment. © by WilTec Wildanger Technik GmbH Item 62641 Page 6 http://www.WilTec.de http://www.aoyue.eu 2022-1 http://www.teichtip.de...
  • Page 7 15. Cleaning the equipment and connections Remove the equipment to be cleaned and clean it thoroughly under run- ning water. Then, re-mount it or store it in the designated intakes. © by WilTec Wildanger Technik GmbH Item 62641 Page 7 http://www.WilTec.de...
  • Page 8 1 s. After using the electric device and switching it off, the vacuum cleaner will switch of after approx. 10 s. © by WilTec Wildanger Technik GmbH Item 62641 Page 8 http://www.WilTec.de...
  • Page 9 For hard-to-reach areas, e.g., corners, radiators Floor brush To dust off highly sensitive furniture or scratch sensitive objects Wet/dry nozzle To vacuum moisture; can also be used as a floor nozzle © by WilTec Wildanger Technik GmbH Item 62641 Page 9 http://www.WilTec.de http://www.aoyue.eu 2022-1 http://www.teichtip.de...
  • Page 10 This logo indicates that this electric equipment must not be disposed with do- mestic waste. The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE- registration number DE45283704. Disposal of used electrical and electronic appliances...