Ducted dual flush pan assembly for mains with controller (12 pages)
Summary of Contents for Galvin Specialised CliniLever TCWMC80PC
Page 1
Working Pressure Range (kPa) Jumper Valve/Ceramic Working Temperature Range (°C) Jumper Valve Ceramic Nominal Flow Rate (LPM) Finish Chrome NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice. TOOLS REQUIRED − Power drill − Spanner −...
Page 2
Galvin Specialised on 1300 514 074. INSTALLATION IMPORTANT: Galvin Specialised products must be installed in accordance with these installation instructions and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical supply conditions must also comply to the applicable national and/or state standards.
Page 3
Version 2, 18 July 2017, Page 3 of 4 3. Fit water temperature indicator 4. Testing − − ® Once CliniLever lever handle is secure, fit Once temperature indicator is fitted, check the the water temperature indicator. operation of the unit and inspect for any leaks. −...
Page 4
Version 2, 18 July 2017, Page 4 of 4 SERVICE AND MAINTENANCE JUMPER VALVE TAPWARE CERAMIC CARTRIDGE TAPWARE 1. Turn off the water supply and turn on the tap 1. Turn off the water supply and turn on the tap handle to drain water from the bodies.