Proline PROCD8B Manual page 97

IMPORTANT: Do not open the loading door while the programme is running. If
you have to open the door, do not keep it open for a long time.
Selection Stand By
After 15 minutes without user action in selection mode, the appliance goes to
energysaving mode due to decreased energy consumption.
"End" will flash on the display for 0,5 sec ON, 3 sec OFF.
If user turns knob (except zero position) and presses buttons, it does not make
any action.
After that, to restart the appliance it will be necessary to move selector to OFF
and select again the programme.
Programme Progress Indicator
The programme follow-up indicator shows the progress of the programme
running. At the beginning of each programme step, the corresponding indicator
LED will illumninate and the LED of the completed step will go out.
Drying – It remains on during the whole drying process until the drying level
reaches "Cooling".
Cooling – It lights up when the drying level reaches "Cooling" and remains on until
the next step.
End – It lights up at the end of the programme.
During the Programme
If you open the door when the programme is running, the appliance will switch
to standby mode. Once the door has been closed, press the Start/Pause button
to resume the programme.
Do not open the loading door when the programme is running. If you have to
open the door, do not keep it open for a long time.
Programme End
Once the programme is completed, the warning LEDs for Start/Pause, water tank
level, filter cleaning and condenser cleaning will turn on. Additionally, an audible
94
PROCD8B IB.indd 94 PROCD8B IB.indd 94 27/7/2022 9:41 AM 27/7/2022 9:41 AM