The dryer cannot
be opened or the
programme cannot be
started. The dryer does
not get activated when
adjusted.
The programme has been
interrupted for no reason.
Clothes have shrunk,
felted or deteriorated.
Water leaking from the
loading door.
The loading door opens
on its own.
The water tank warning
symbol is on/flashing.
The condenser cleaning
warning symbol is on.
The filter cleaning
warning symbol is on.
PROCD8B IB.indd 103
PROCD8B IB.indd 103
The dryer might not be plugged in.
The loading door might be open.
You might not have set a programme
or pressed the Start/Pause button.
Child lock might be active.
The loading door might not be closed
properly.
There might have been a power
failure.
The water tank might be full.
The programme used might not be
suitable for the type of laundry.
There might be lint accumulated on
the inner surfaces of the loading door
and on the surfaces of the gasket of
the loading door.
The loading door might not be closed
properly.
The water tank might be full.
The water discharge hose might be
bent.
De condensator kan vuil zijn.
The condenser might be unclean.
The lint filter might be unclean.
The filter seat might be clogged by
lint.
There might be a layer that causes
obstruction on the surface of the
lint filter.
Make sure that the plug is fitted in
the socket.
Make sure that the loading door is
properly closed.
Make sure that the programme has
been set and the dryer is not in the
Standby (Pause) mode.
Deactivate the child lock.
Make sure that the loading door is
properly closed.
Press the Start/Pause button to start
the programme.
Empty the water tank.
Check the care labels on the laundry
items, select a suitable programme
for the type of laundry.
Clean the inner surfaces of the
loading door and the surfaces of the
gasket of the loading door.
Push the loading door until you hear
the closing sound.
Empty the water tank.
If the dryer is connected directly to
the water outlet, check the water
discharge hose.
Reinig de condensator.
Clean the condenser.
Clean the filter.
Clean the filter seat.
Wash the filter with lukewarm water.
103
27/7/2022 9:41 AM
27/7/2022 9:41 AM
Need help?
Do you have a question about the PROCD8B and is the answer not in the manual?
Questions and answers