Proline PROCD8B Manual page 80

Electrical Safety
• The appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that
is regularly switched on and off by a utility.
• Do not touch the power plug with wet hands. Always pull the
plug to unplug the product, otherwise, there will be risk of an
electric shock.
• Connect the dryer to a grounded socket with fuse protection.
Have the earth connection installed by a qualified electrician. The
manufacturer cannot be held responsible for damages/losses
resulting from using the dryer without an earth connection as
required by local regulations.
• The voltage and the allowable fuse protection are indicated on
the type plate.(For the type plate, please see Overview)
• Voltage and frequency values indicated on the type plate must
be equal to the mains voltage and frequency value in your house.
• Unplug the dryer when it is not used for an extended period, and
before installation, maintenance, cleaning and repair, otherwise,
the dryer may get damaged.
• The plug socket must be freely accessible at all times after
installation.
A damaged power cord/plug can cause fire or give you an
electric shock. When damaged it must be replaced, this should only
be done by qualified personnel.
To avoid the risk or fire or electric shock, do not use
extension cords, multi sockets or adapters to connect the dryer to
mains power.
Children's Safety
• Do not leave children unattended near the appliance.
PROCD8B IB.indd 77 PROCD8B IB.indd 77
77
27/7/2022 9:41 AM 27/7/2022 9:41 AM