Proline PROCD8B Manual page 107

The programme cannot
be started and the filter
warning led is flashing.
The programme cannot
be started and both
condenser and filter
warning leds are
flashing.
AUTOMATIC FAULT WARNINGS AND WHAT TO DO
Your tumble dryer is equipped with a built-in fault detection system, indicated
by a combination of flashing operation lights. The most common failure codes
are shown below.
ERROR CODE
E03
E04
E05
E06
E08
104
PROCD8B IB.indd 104 PROCD8B IB.indd 104
The filter seat might be clogged by
lint.
There might be a layer that causes
obstruction on the surface of the
lint filter.
The condenser may not be placed.
The condenser and filter may not be
placed.
The filter and condenser warning leds
are flashing even though the filter
and condenser are placed.
Empty the water tank, if problem does not solved, contact the nearest
authorised service agent.
Contact the nearest authorised service agent.
Contact the nearest authorised service agent.
Contact the nearest authorised service agent.
There may be voltage fluctuation in mains. Wait until voltage is appropriate for
Clean the filter seat.
Wash the filter with lukewarm water.
Replace the condenser.
Replace the filter and condenser.
Call technical service.
SOLUTION
working range.
27/7/2022 9:41 AM 27/7/2022 9:41 AM