Troubleshooting - Proline PROCD8B Manual

Your dryer is fitted with systems that continuously perform checks during the
drying process to take the necessary measures and warn you in case of any
malfunction.
WARNING: If the problem persists even if you have applied the steps in this
section, please contact your dealer or an Authorised Service Provider. Never try
to repair a malfunctional product.
PROBLEM
The drying process takes
a long time.
Laundry comes out damp
at the end of the drying
process.
102
PROCD8B IB.indd 102 PROCD8B IB.indd 102

TROUBLESHOOTING

POSSIBLE CAUSE
The surface of the lint filter might be
clogged.
The condenser might be clogged.
The ventilation grilles at the front of
the dryer might be closed.
There might be a layer of limescale
on the humidity sensor.
The dryer might be overloaded with
laundry.
The laundry might be insufficiently
spun.
The laundry that comes out hot at the end of the drying process
generally feels more humid.
The programme used might not be
suitable for the type of laundry.
The surface of the lint filter might be
clogged.
The condenser might be clogged.
The dryer might be overloaded with
laundry.
The laundry might be insufficiently
spun.
SOLUTION
Wash the filter with lukewarm water.
Clean the condenser.
Open the doors/windows to prevent
the room temperature from rising
too much.
Clean the humidity sensor.
Do not overload the dryer.
Select a higher spin speed on your
washing machine.
Check the care labels on the
laundry items, select a suitable
programme for the type of laundry
and additionally, use the time
programmes.
Wash the filter with lukewarm water.
Clean the condenser.
Do not overload the dryer.
Select a higher spin speed on your
washing machine.
27/7/2022 9:41 AM 27/7/2022 9:41 AM