Adjusting The Projector Image - Optoma L1 User Manual

SETUP AND INSTALLATION

Adjusting the projector image

Image height
The projector is equipped with elevator feet for adjusting the image height.
1. Locate the adjustable foot you wish to adjust on the underside of the projector.
2. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector.
Focus
To adjust the focus, do the following:
1. Open either "
2. Press the "t" or "u" button on the remote control until the image is sharp and legible.
22 English
" "Display-->Focus" menu or press the "
Menu
A
Display
Enter
Focus
B
B
Tilt-Adjustment Feet
Tilt-Adjustment Ring
" button on the remote control.
Enter
B B
Focus
A