Using The Projector; Powering On / Off The Projector - Optoma L1 User Manual

USING THE PROJECTOR

Powering on / off the projector

Powering on
1. Securely connect the power lead and signal/source cable. When connected, the On/Standby LED will
turn red.
2. Turn on the projector by pressing the "
3. A start up screen will display in approximately 1 second and the On/Standby LED will be flashing
white.
Note:
The first time the projector is turned on, you will be prompted to select the preferred language, projection
orientation, and other settings.
Powering off
1. Turn off the projector by pressing the "
2. The following message will be displayed:
or
Enter
Enter
Power Off
Power Off?
Press power key again.
" button on the projector keypad or the remote control.
" button on the projector keypad or the remote control.
25
English