Table of Contents
Advertisement
USING THE PROJECTOR
Menu navigation and features
The projector has multilingual on-screen display menus that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect the source.
1.
To open the OSD menu, press
2.
When OSD is displayed, use pq keys to select any item in the main menu. While making a selection
on a particular page, press
3.
Use pq keys to select the desired item in the sub menu and then press
Adjust the settings by using tu keys.
4.
Select the next item to be adjusted in the sub menu and adjust as described above.
5.
Press
to confirm, and the screen will return to the main menu.
6.
To exit, press
settings.
Main Menu
on the remote control.
on the remote control or the projector keypad to enter sub menu.
again. The OSD menu will close and the projector will automatically save the new
Sub Menu
Picture Mode
Dynamic Range
Brightness
Contrast
Sharpness
Gamma
Dynamic Black
Color Settings
Image Picture
to view further settings.
Settings
Cinema
0
0
10
Off
English
27
Advertisement
Table of Contents
