Table of Contents
Advertisement
Installation
7.
Connect the card reader to the Xerox device
•
Insert the USB connection into the slot provided on the rear of the network controller.
8.
Use the cable ties provided to ensure the cabling is neat and tidy. The hardware installation is now
complete.
9.
Confirm the installation
•
When the card reader and the software has been installed and configured, the Card Reader
Detected screen displays on the Xerox device local user interface.
•
Select OK.
Common Access Card is now ready for use.
Note:
If the card reader is not detected, refer to
20
Xerox Common Access Card
Common Access Card Installation Guide
Troubleshooting Tips
on page 25 for information.
Advertisement
Table of Contents
Troubleshooting
