Horizon Fitness 7.4AT Owner's Manual page 13

ASSEMBLY STEP 4
HARDWARE FOR STEP 4
PART TYPE
I BOLT
J SPRING WASHER
K FLAT WASHER
6
9L
DESCRIPTION QTY
M8 15L 8
x
8.2X15.4X2.0T 8
8.4X15.5X1.6T 8
9R
8
K
J
I
A Open HARDWARE FOR STEP 4.
B Attach RIGHT SIDE PULSE RATE GRIP (8)
to the underside of the CONSOLE (6) using
4 BOLTS (I), 4 SPRING WASHERS (J) and
4 FLAT WASHERS (K).
C Connect the RIGHT CONSOLE CABLES (9R)
and carefully tuck in wires to avoid damage.
D Repeat STEP B on the LEFT SIDE.
E Connect the LEFT CONSOLE CABLES (9L)
and carefully tuck wires to avoid damage.
NOTE: Fully tighten all bolts from PREVIOUS STEPS
I J
ASSEMBLY COMPLETE!
Before the first use, lubricate the treadmill deck by
following the instructions in the MAINTENANCE
section in the TREADMILL GUIDE.
K
13