Siemens AS-i Master CM 1243-2 a Manual page 117

No. Function or call to the host interface (symbolic
representation)
24 Status =
Write_Extended_ID−Code_11(S_Ext_ID−Code_1)
25 AImage, Status = Read_AIDI()
26 Status = Write_AODI(AImage)
27 String, Status = Read_ParamStr(S_Addr)
28 Status = Write_ParamStr(S_Addr, String)
29 String, Status = Read_DiagStr(S_Addr)
30 String, Status = Read_IdentStr(S_Addr)
B Supported slave profiles
1 Support of extended address mode
2 Support of Combined transaction type 1 integrated
(S−7.3 only)
3 Full support of Combined transaction type 1 integrated
4 Support of Combined transaction type 2 integrated
5 Support of Combined transaction type 3 integrated
6 Support of Combined transaction type 4 integrated
7 Support of Combined transaction type 5 integrated
AS-i master CM 1243-2 and AS-i data decoupling unit DCM 1271 for SIMATIC S7-1200
Manual, 04/2013, A5E02655230010A/RS-AA/003
AS-Interface Protocol Implementation Conformance Statements
A.1 AS-Interface Protocol Implementation Conformance Statement (PICS)
M4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Remark / implementation of the function with
See Section "Description of the AS-i line calls
and AS-i slave calls (Page 58)".
Not implemented
See section Description of the AS-i line calls
and AS-i slave calls (Page 58) .
Through automation system access to the I/O
data of the AS-i master CM 1243-2
See "Read_Parameter_String" in section
Description of the AS-i line calls and AS-i slave
calls (Page 58)
See section Write AS-i slave parameter string
(Write_Parameter_String) (Page 88)
See section Read AS-i slave diagnostics string
(Read_Diagnostic_String) (Page 89)
See section Read AS-i slave ID string
(Read_Identification_String) (Page 90)
Support for profiles 7.3 and 7.4 only.
117