Diagnostic Data Records; Diagnostics Via The S7-1200 Web Server - Siemens AS-i Master CM 1243-2 a Manual

Industrial controls for simatic s7-1200
Table of Contents

Advertisement

Diagnostics

8.4 Diagnostic data records

8.4
Diagnostic data records
Further diagnostics information can be read out from the AS-i master CM 1243-2 using the
data record interface.
The table below provides an overview of the data records that can be used for this purpose:
Table 8- 1
Diagnostic data blocks
Name
Read lists and flags
(Get_LPS_LAS_LDS_LPF_Flags)
Read AS-i slave status (Read_Status)
Read AS-i slave diagnostics string
(Read_Diagnostic_String)
Get_LAS_CDI_PI_Flags
To access these data records, call the block "RDREC" in your program. Instructions for using
this block and the parameters required can be found in the section describing the data
record interface (section "Using the data record interface (Page 55)").
8.5

Diagnostics via the S7-1200 Web server

Diagnostics via the S7-1200 Web server
The Web server of the S7-1200 enables you to access data from Web pages regarding your
CPU and the connected components.
The Web server also enables user-defined Web pages to be integrated which display
contents of the CPU as well as the AS-i master CM 1243-2.
The diagnostic data of the AS-i master CM 1243-2 can also be read via the user program
interface (alarms, diagnostic data records) and integrated into the Web pages.
Any HTML authoring software can be used to create the Web pages – you can construct and
arrange the pages as you wish.
The connection between the Web page contents and the data of the user program is
established using "AWP commands" (Automation Web Pages) which you insert in your
HTML code.
A detailed description of these possibilities can be found in the system manual for S7-1200
in the section "Web server".
104
Index
Information
84
List of configured AS-i slaves
List of active AS-i slaves
List of detected AS-i slaves
List of existing I/O faults
AS-i master flags (e.g. APF)
80
AS-i slave status register Also contains information about I/O faults
29
Diagnostics string of an AS-i slave acc. to profile 7.4
85
Configuration data for the connected slaves
AS-i master CM 1243-2 and AS-i data decoupling unit DCM 1271 for SIMATIC S7-1200
Manual, 04/2013, A5E02655230010A/RS-AA/003

Advertisement

Table of Contents
loading

This manual is also suitable for:

As-i dcm 1271

Table of Contents