Volvo 240 1991 Owner's Manual page 54

Volvo 1991 240 Model
Remove the plastic screw covering the anchorage point you want to use. This can be done with a
suitable coin. The screw is removed counterclockwise.
Place the top tether anchorage plate as shown in the illustration. Using the 5/16 UNC bolt, tighten
securely, to 16±2.5 ft. lbs. Place the plastic trim plate over the anchorage plate, if desired.
WARNING!
Child Restraint Anchorages are designed to withstand only those loads imposed by correctly fitted
Child Restraints. Under no circumstances are they to be used for adult seat belts or harnesses.
The anchorages are not able to withstand excessive forces on them in the event collision if full harness
seat belts or adult seat belts are installed to them.
An adult who uses a belt anchored in a Child Restraint Anchorage runs a great risk of suffering severe
injuries should a collision occur.
pg. 40 Seat belts
file:///K|/ownersdocs/1991/1991_240/91240_06.htm (4 of 10)12/30/2006 8:57:11 AM