Table of Contents
Advertisement
en Basic settings
Basic setting
Automatic door
opening
Factory setting
1
Factory setting (may vary according to model)
15.2 Changing basic settings
Open the appliance door.
1.
Press
.
2.
To open the basic settings, press
3.
for 3 seconds.
The display shows Hxx.
a
The display shows
a
Press
4.
the display shows the required set-
ting.
Press
repeatedly until the dis-
5.
play shows the right value.
You can change several settings.
36
Display text Selection
1
o02
o00 - o02
rE
Start with
YES
Confirm with
.
repeatedly until
Description
Activate or deactivate auto-
matic opening of the appli-
ance door during the drying
phase.
If the function has been ac-
tivated, the running time may
increase.
The following settings are
possible:
With the setting "o00"
¡
automatic door opening is
deactivated in all pro-
grammes.
With the setting "o01"
¡
automatic door opening is
activated in all pro-
grammes.
With the setting "o02"
¡
automatic door opening is
activated only in the Eco
50°C programme.
→ "Automatic door opening",
Page 11
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
To save the settings, press
6.
for 3 seconds.
Close the appliance door.
7.
Advertisement
Table of Contents
