Setting A Programme; Setting Additional Functions; Setting Timer Programming; Starting The Programme - V-ZUG Adorina V600 Information For Use

Hide thumbs Also See for Adorina V600:
Table of Contents

Advertisement

en operation
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
14.2 Setting a programme
To adjust the washing programme to
the soiling level of the tableware, se-
lect a suitable programme.
Press the right programme button.
The programme is set and the pro-
a
gramme button flashes.
The remaining running time of the
a
programme appears on the dis-
play.
14.3 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
Press the button for the relevant
additional function.
→ "Additional functions", Page 20
The additional function is set and
a
the additional function button
flashes.
14.4 Setting timer program-
ming
You can delay the start of the pro-
gramme by up to 24 hours.
Press
⁠ .
1.
"h:01" appears in the display.
a
Use
to set the required start
2.
time for the programme.
Press
⁠ .
3.
This activates timer programming.
a
32
Tip: To deactivate timer program-
ming, press
repeatedly until "h:00"
appears in the display.
14.5 Starting the programme
Press
.
The programme has ended when
a
the display shows "0h:00m".
Notes
If you want to add more tableware
¡
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
You can only change a pro-
¡
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 33
The appliance switches off auto-
¡
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
14.6 Interrupting programme
Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Open the appliance door carefully.
1.
Press
⁠ .
2.
The programme is saved and the
a
appliance switches off.
Press
to resume the pro-
3.
gramme.
Close the appliance door.
4.

Advertisement

Table of Contents
loading

Table of Contents