Gree Vita GWC09ATCXB-D3DNA3A/I Operation Manual page 17

INDOOR UNIT DISPLAY SETTING
Allows the indoor unit to display of the temperature and power indicators on its front panel.
Press the LIGHT button (
Press the button again to turn off the display.
TEMPERATURE DISPLAY SETTING
Allows the user to select the type of temperature displayed on the indoor unit's front panel.
Press the TEMP button ( ) on the remote control to set the temperature type to set temperature. The sym-
bol " " (or no display, depending on model) will appear on the display screen of the remote control. Press
the button again to set the temperature type to indoor ambient temperature. The symbol " " will appear on
the display screen.
ENERGY - SAVING FUNCTION
Allows the indoor unit to automatically adjust the set temperature based on factory setting to achieve the
best energy saving performance.
While in Cooling mode, press the TEMP ( ) and CLOCK (
trol to activate the function. The temperature display of the remote control will show "
buttons simultaneously again to deactivate the Energy-Saving function.
NOTES :
▪ When Energy-Saving is active, the set temperature cannot be adjusted and the fan speed is auto-
matically set to Auto speed and cannot be changed. Pressing the TURBO button (
signal being sent.
▪ The Sleep and Energy-Saving functions cannot operate concurrently. If Energy-Saving has been pre-
viously set, activating Sleep mode will automatically cancel the Energy-Saving function. Conversely, if
a Sleep mode has been previously set, activating the Energy-Saving function will automatically cancel
the Sleep function.
8 °C HEATING FUNCTION
Allows the indoor unit to automatically start heating operation to maintain an indoor ambient temperature of
8 °C (46 °F) to prevent property damage when the user is absent for an extended period of time.
While in Heating mode, press the TEMP ( ) and CLOCK (
to activate the function. The symbol "
temperature indicator will show "
Heating function.
NOTES :
▪ When 8 °C Heating is active, the set temperature cannot be adjusted and the fan speed is automat-
ically set to Auto speed and cannot be changed. Pressing the TURBO button (
OPERATION GUIDE
) on the remote control to turn on the display of the indoor unit's front panel.
" will appear on the display screen of the remote control and the
". Press the same buttons simultaneously again to deactivate the 8 °C
) buttons simultaneously on the remote con-
) buttons simultaneously on the remote control
". Press the same
) will result in no
) will result in no
17