Brake System Inspection; Electrical System Inspection - Velotric Thunder 1ST Manual

Reflectors
■ Ensure that all reflectors are properly fitted and not obscured.
■ Ensure that front and rear reflectors are secured, clean, and positioned perpendicular to the
wheel.
Fasteners
Ensure that all fasteners are properly tightened and secured according to "Recommended Torque
Values" .

Brake System Inspection

Front Brake Rear Brake
Brakes are essential to safety. Test your brakes for proper functioning before every ride.
■ Ensure that the brakes are clean and free of debris that could interfere with the brake system.
■ Ensure that brake levers are lubricated and tightly secured to the handlebar.
■ Check brake pads and rotors for wear and ensure that they are not overworn.
■ Ensure that the brake rotor fits correctly between the brake pads.
■ Ensure that the front and rear brakes work properly.
■ Test that the brake levers are firm and that the brake and rear light are functioning properly.
■ While standing still, ensure that you can apply full braking force without the brake lever
touching the handlebar. Otherwise, the brake lever needs to be adjusted. For detailed
information, refer to "Adjust the Brake Lever Positioning" .
14

Electrical System Inspection

Control Panel
■ Ensure that the control panel is securely tightened.
■ Ensure that the control panel works properly.
Front Light & Rear Light
■ Ensure that the front and rear lights are securely attached and properly positioned.
■ Ensure that the front and rear lights are not covered by foreign objects.
■ Ensure that the cable of the front light is properly connected and secured.
■ Ensure that the front light can be switched on or off when pressing the "Light" button.
■ Ensure that the rear light can be switched on or off when pressing the button on its top.
Battery
■ Ensure that the battery is properly installed and securely tightened.
■ Ensure that the battery is well charged before riding. You can check the battery level by the 4
LED indicators on the control panel. For more detailed information, refer to "Control Panel" .
■ Ensure that the battery is stored at an ambient temperature of 50°F to 77°F (10°C to 25°C).
For more detailed information, refer to "Battery Storage" .
Cables
■ Ensure that all cables are not overly bent and no kinks are present.
■ Check and ensure all cable connections are tight, secure and free from debris or moisture.
■ Ensure that there is no damage or wear on the cables.
■ Ensure that all cables and housings are properly secured to the frame or fork so that they
cannot interfere with or get caught on moving parts.
15