Advertisement
Quick Links
Advertisement
Related Manuals for Velotric Nomad Series
Summary of Contents for Velotric Nomad Series
- Page 1 Nomad Series Quick Start Guide...
- Page 2 We highly recommend that you to follow along this video tutorial to assemble your bike. Simply scan the QR code below. Or visit: velotricbike.info/nomad1...
- Page 3 Contents This guide will get your new bike set up and ready to ride. What's in the Toolkit Bike Assembly Bike Diagram...
- Page 4 What’s in the Toolkit What’s in the Toolkit Left / Right Pedal Front / Rear Reflector Bell Tool Bag Spare bolts Socket Wrench Front Hub Cap / Washer × 2 Phillips Screwdriver Stem Clamp Bolt × 2 M15/M8 Wrench Display Panel Bracket Bolt × 2 M10 Wrench Display Panel Mount Bolt ×...
- Page 5 Kickstand Handlebar Step 1 Step 2 Bike Assembly Bike Assembly Put on the hub cap. Unscrew the bolts for Attach the kickstand Remove the four bolts Adjust the handlebar Tighten the four bolts the kickstand with the and tighten the bolts. on the clamp with the by aligning the in the order illustrated...
- Page 6 Front Wheel Front Fender Step 3 Step 4 Bike Assembly Bike Assembly Take out the brake pad Loosen the front hub Tighten and secure the Unscrew the bolts that Attach the support Adjust the fender to spacer from the front caps and gently slot front hub cap with the affix the front fender to...
- Page 7 Pedals Front Light Step 5 Step 6 Bike Assembly Bike Assembly Attach the right pedal to the right Attach the left pedal to the left Attach the front light to Fix the light to a Connect the two front crankset by turning the pedal crankset by turning the pedal the mount.
- Page 8 Display Bell and Front/Rear Reflector Step 7 Step 8 Bike Assembly Bike Assembly Unscrew the bolts on Connect the display Wrap the display wires Unscrew the bolt on the Unscrew the bolt on Attach the rear the mounting brackets cables (marked green together with the bell mount and install the reflector mount...
- Page 9 Stem Angle Battery Step 9 Step 10 Bike Assembly Bike Assembly Adjust the stem to make the handlebar Tighten the bolts on both sides of the Fit the battery into the Insert the key into the Press firmly to nest the perpendicular to the front wheel.
- Page 10 Charging Start Your Bike Step 11 Step 12 Bike Assembly Bike Assembly The battery can be charged either in or out of the bike. Power off the bike before Peel the protective film Hold the on/off button Our system provides charging the battery in the bike.
- Page 11 Test the Features Tire Pressure Check Step 13 Step 14 Bike Assembly Bike Assembly When the display is on: Always check your tires before a ride. If the tires seem soft or spongy, pump them up to the pressure indicated on the side of the tire. Hold the ‘’+‘’...
- Page 12 Bike Diagram Bike Diagram Front Light Motor Battery Brake Lever Display Handlebar Cassette Brake Rotor Throttle Stem Rear Derailleur Brake Caliper Remote Saddle Chain Tire Bell Seatpost Crankset Suspension Fork Shifter Seatpost Clamp Pedal Grip...
- Page 13 Define Your Adventure.
- Page 14 Contact Website: www.velotricbike.com E-mail: help@velotricbike.com Phone: +1 888-559-3099 Hours: Monday-Friday, 7AM-6PM PST...