Attaching The Base Plate To The Handlebar Base - Garmin ZUMO XT2 Owner's Manual

Installing the Handlebar Base to the Clutch-Clamp or Brake-Clamp Brackets
1 Remove the two factory bolts on your clutch-clamp or brake-clamp bracket
1
NOTE: both / in. standard and M6 bolts are included. Match the size of the factory bolts on your clutch-
4
clamp or brake-clamp bracket.
2 Thread the new bolts
3 Tighten the bolts to secure the handlebar base.

Attaching the Base Plate to the Handlebar Base

1 Align the ball of the handlebar base
arm .
2 Insert the ball of the handlebar base
3 Tighten the knob slightly.
4 Adjust for optimal viewing and operation.
5 Tighten the knob to secure the mount.
6
through the handlebar base, spacers
and the ball of the base plate
and the ball of the base plate
.
, and clutch-clamp or brake-clamp bracket.
with each end of the double-socket
into the double-socket arm .
Installation