Table of Contents
Advertisement
Placing a Call Using Voice Dial
1 Select
> Phone > Voice Dial.
2 Listen for the voice prompt.
3 Say Call and say the contact name, phone number or location you want to call.
Using in-call options
In-call options are available when you answer a call. Some options may not be compatible with your phone.
TIP: if you close the in-call options page, you can open it again by selecting
select the caller from the map.
• To set up a conference call, select Add Call.
• To transfer audio to your phone, select Call in Progress on Navigator.
TIP: you can use this feature if you want to disconnect the Bluetooth connection and remain on the call, or if
you need privacy.
• To use the dial pad, select Keypad.
TIP: you can use this feature to use automated systems, such as voice mail.
• To mute the microphone, select Mute.
• To hang up, select End Call.
Disconnecting a Bluetooth device
You can temporarily disconnect a Bluetooth device without deleting it from the paired devices list. The
Bluetooth device can connect to your zūmo navigator automatically in the future.
1 Select an option:
• To disconnect a phone, select
• To disconnect a headset, select
2 Select the device to disconnect.
3 Select Disconnect.
Deleting a paired phone
You can delete a paired phone to prevent it from automatically connecting to your device in the future.
1 Select
> Phone.
2 Select the phone and select Forget Device.
Garmin is not responsible for the accuracy or timeliness of the traffic information.
Your device can provide information about traffic on the road ahead or on your route. You can set your device to
avoid traffic when calculating routes, and to find a new route to your destination if a large traffic delay occurs on
your active route
(Traffic Settings,
your area.
To provide traffic information, your device must be receiving traffic data.
• All product models can receive subscription-free traffic data using the Tread app.
Traffic data is not available in all areas. For information about traffic coverage areas, go to garmin.com/traffic.
Receiving traffic data using your smartphone
Your device can receive subscription-free traffic data while connected to a smartphone running the Tread app.
1 Connect your device to the Tread app
2 On your zūmo device, select
32
> Phone.
> Headphone.
Traffic
NOTICE
page 47). The traffic map allows you to browse the map for traffic delays in
(Pairing with Your Smartphone,
> Traffic and verify the Traffic check box is selected.
from any screen. You can also
page 29).
Traffic
Advertisement
Table of Contents
