Attaching The Base Plate To The Handlebar Base; Installing Your Device In The Motorcycle Mount; Removing Your Device From The Motorcycle Mount - Garmin ZUMO XT Owner's Manual

Attaching the Base Plate to the Handlebar Base

1 Align the ball of the handlebar base
arm .
2 Insert each ball into the double-socket arm.
3 Tighten the knob slightly.
4 Adjust for optimal viewing and operation.
5 Tighten the knob to secure the mount.

Installing your device in the motorcycle mount

1 Fit the bottom of your device into the cradle.
2 Push the top of the device forward until it snaps into place.
The latch on the mount stays up after you have inserted the device.

Removing Your Device from the Motorcycle Mount

1 Press the release button on the top of the mount.
2 Lift out the device.
Installation
and the ball of the base plate with each end of the double-socket
7