Traffic Settings; Setting A Simulated Location; Driver Assistance Settings; Display Settings - Garmin ZUMO XT2 Owner's Manual

Traffic Settings

From the main menu, select
Traffic: enables traffic.
Optimise Route: enables the device to use optimised alternative routes automatically or upon request
traffic delays on your route,
Current Provider: sets the traffic provider to use for traffic data. The Auto option selects the best available
traffic data automatically.
Subscriptions: lists the current traffic subscriptions.

Setting a simulated location

If you are indoors or not receiving satellite signals, you can use the GPS simulator to plan routes from a
simulated location.
1 Select > Navigation > GPS Simulator.
2 From the main menu, select View Map.
3 Tap the map twice to select an area.
The address of the location appears at the bottom of the screen.
4 Select the location description.
5 Select Set Location.

Driver Assistance Settings

Select > Driver Assistance.
Rider Alerts: allows you to enable or disable alerts for upcoming zones or road conditions
Features and Alerts, page 7).
Speeding Alert: alerts you when you are exceeding the speed limit.
Reduced Speed Tone: alerts you when the speed limit decreases.
Ride Summary: displays a summary of your ride at the end of a route.
Helmet Guide: displays changes for helmet requirements when crossing borders.
Country Border Alert: displays a notification when crossing international borders.
Route Preview: displays a preview of the major roads on your route when you start navigation.
Break Planning: reminds you to take a break, and displays upcoming services after you drive for an extended
time. You can enable or disable break reminders and upcoming service suggestions.
Automatic Incident Detection: enables the navigator to detect incidents and to notify emergency contacts when
the navigator detects an incident
Incident Messaging: alerts your emergency contacts if an incident is detected
Notifications, page 8).
Proximity Alerts: alerts you when you approach speed cameras or red light cameras.

Display settings

Select > Display.
Orientation: allows you to set the display to portrait (vertical) or landscape (horizontal).
NOTE: this feature is not available on all product models.
Colour Mode: allows you to select day or night colour mode. If you select the Auto option, the device
automatically switches to day or night colours based on the time of day.
Brightness: allows you to adjust the display brightness.
Display Timeout: allows you to set the amount of idle time before your device enters sleep mode while using
battery power.
Screenshot: allows you to take a picture of the device screen. Screenshots are saved in the Screenshot folder of
the device storage.
Settings
> Navigation > Traffic.
page 16).
(Incident Detection and Notifications,
(Rider Awareness
page 8).
(Incident Detection and
(Avoiding
47