Adjustment Of The Anti-Skating - Clearaudio Profiler User Manual

User manual / Bedienungsanleitung

5.5 Adjustment of the anti-skating

You can adjust the anti-skating setting by adjusting the anti-skating screw (Pic. 17 / 1, 2, 3).
The level of anti-skating force required will depend on the tracking force of the cartridge.
Level of anti-skating:
minimal anti-skating
medium anti-skating
maximum anti-skating
Illustration 1
(minimal anti-skating)
Pic. 17: Anti-skating adjustment
We recommend to re-check all settings again and correct them if necessary before connecting the
tonearm to your phono pre-amplifier.
Clearaudio wishes you a lot of joy fun with your new
Page / Seite 16
tracking force
>> 10-15mN
>> 15-20mN
>> 20mN and more
Illustration 2
(medium anti-skating)
The general setup is now completed.
position of the antiksating screw
>> see illustration 1
>> see illustration 2
>> see illustration 3
Illustration 3
(maximum anti-skating)
Profiler
tonearm.
© clearaudio electronic GmbH, 2022-11