Table of Contents
Advertisement
File Number Reset
Setting the File No. Reset to OFF is useful for avoiding file name duplication when files are
downloaded to a computer. However, if you want to start numbering files from 0001 after
a new SD card is inserted, or after the memory is formatted, or when you experience a
""FILE NUMBER OVER" warning (p. 31), set the File Number Reset mode to ON.
Mode
Situations
1. A new SD card is
inserted.
2. The internal memory or
the memory card is
formatted
To numbering the files from 0001 when a new SD card is inserted:
1. Insert a new SD card.
2. Turn the camera on and press the
3. Press the
or
arrow to select the REC
Menu.
4. Press the
or
NO. Reset then press the SET button or
arrow to enter its submenu.
5. Press the
or
press the SET button.
6. Press the
button twice to close the
menu window.
To number the files from 0001 when memory is formatted:
1. Follow steps 2-6 above to set the File No. Reset to ON mode.
2. Format the memory. (Refer to p. 9)
Off (Default)
File number will start from
the previous number. For
example:
0065
arrow to select File
to select On and then
- 3 1 -
File numbers will reset to
0001. For example:
0066
button.
On
0065
0001
Advertisement
Table of Contents
