Table of Contents
Advertisement
2 Preparing the Camera
Installing the Batteries
Insert two (2) AA-size alkaline batteries (included with the camera)
1.
Be sure that the camera power is off.
Slide the Battery/Memory Card door in the
2.
direction of the arrow, and lift it open.
3.
Insert two AA batteries with the positive (+)
and negative (-) poles matching the
directions indicated inside the battery cover.
4.
Close the Battery/Memory Card door.
Battery Status Indications
The battery power level indicator represents the level of power of the batteries. The
meaning of each icon is as follows:
Charge Level
Indicator
When the battery is running out, the message "Replace Battery" will be displayed on the
LCD.
If POWER button is pressed for over 1 second but the camera still does not
power on, the batteries may be drained. Replace the batteries with new ones
and try again.
High
- 8 -
Low
Advertisement
Table of Contents
