Installing The Driver & Software; Installing The Driver - Concord Camera 3103 User Manual

Installing the Driver & Software
Note: You do not need to install the drivers if you are running Windows,ME, 2000 or XP.
Please go to the "Installing the Software" section.
Note to Mac users: You do not need to install drivers or software to transfer pictures.
Please see "Downloading Images to a Computer" for instructions.

Installing the Driver

Installing Camera Drivers (Windows 98/98SE)
If your operating system is Windows 98/98SE:
NOTE:
If your system requires a manual installation: Click Run, type "(the
CD-ROM drive):/install.exe", then click OK.
Follow the directions that follow to install all the software.
1. Insert the CD into your PC CD-ROM drive. Make sure that
your camera is not connected to the computer.
2. A red check mark appears on the left side of each installaiton
choice. Remove all checks except the one for the camera
driver by clicking on the checks next to each choice.
3. Click on install.
4. Follow the on-screen instructions. After the installation has finished,
reboot your computer. You are now ready to install the software.
44
Installing the Software