Using The Infocenter Lcd Display - Toro Reelmaster 5510 Operator's Manual

Note:
There should be no machine response
when you press the traction pedal while the
parking brake is engaged. An advisory message
should appear on the InfoCenter.
Checking the Automatic Parking
Brake Engage
1. Sit in the operator's seat.
2. Start the engine.
3. Disengage the parking brake.
4. Rise from the seat.
Note:
The red light on the parking-brake
switch should illuminate when you are out of the
operator's seat, indicating that the parking brake
is on.
Checking the Cutting Unit Lower
Disable Interlock
1. Sit in the operator's seat.
2. Start the engine.
3. Ensure that the cutting units are lifted to the
transport position.
4. Rise from the seat.
5. Lower the cutting units.
Note:
The cutting units should not lower when
you are out of the operator's seat.
Using the InfoCenter LCD
Display
The InfoCenter LCD display shows information about
your machine, such as the operating status, various
diagnostics and other information about the machine
(Figure 43) There is a splash screen and main
information screen of the InfoCenter. You can switch
between the splash screen and main information
screen, at any time, by pressing any of the InfoCenter
buttons and then selecting the appropriate directional
arrow.
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can
use it to back out of any menu you are currently
using.
•
Middle Button—use this button to scroll down
menus.
•
Right Button—use this button to open a menu
where a right arrow indicates additional content.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button is labeled with an icon displaying its current
function.
InfoCenter Icon Description
SERVICE DUE
25
Figure 43
3. Middle button
4. Left button
Indicates when scheduled service
should be performed
Hour meter
Info icon
Fast
Slow
Fuel level
Glow plugs are active
Raise cutting units
g020650