Advertisement
A character precedes a data or address parameter to specify the numeric format, as follows
(if not specified, the format is hexadecimal):
An asterisk (*) following a signal name for signals that are level significant denotes that the
signal is true or valid when the signal is low. An asterisk (*) following a signal name for
signals that are edge significant denotes that the actions initiated by that signal occur on
high to low transition.
In this manual, assertion and negation are used to specify forcing a signal to a particular
state. In particular, assertion and assert refer to a signal that is active or true; negation and
negate indicate a signal that is inactive or false. These terms are used independently of the
voltage level (high or low) that they represent.
®
Motorola
and the Motorola logo are registered trademarks of Motorola, Inc.
MC68040™ is a trademark of Motorola, Inc.
IndustryPack™ and IP™ are trademarks of GreenSpring Computers, Inc.
All other products mentioned in this document are trademarks or registered trademarks of
their respective holders.
This edition of the MVME162FX VME Embedded Controller Installation and Use
document incorporates the following changes:
Date
March 2000
Terminology
$
Specifies a hexadecimal character
0x
Specifies a hexadecimal number
%
Specifies a binary number
&
Specifies a decimal number
Recent Updates
A chapter of pin assignments was added to the manual.
The frontmatter and the Related Publications sections were updated,
and the overall manual contents reorganized, to reflect current MCG
practice in those areas.
Details of console cable routing to the base board and transition
modules were clarified in response to user feedback.
Description of Change
Advertisement
