i-PRO WV-S1536LNSA Basic Information page 15

■ Remove a microSD memory card
When removing a microSD memory card, reverse the procedure.
• To remove the microSD memory card, hold down the SD ON/OFF button for about 2 seconds.
When the flashing SD MOUNT indicator goes out, you can remove the microSD memory card.
IMPORTANT:
• Before turning off the camera power switch, make sure that the SD MOUNT indicator is
turned off. If you turn off the camera power switch while the SD MOUNT indicator is lit or
flashing, the recorded data may be corrupted or damaged.
Note:
• When using a microSD memory card, format it using this product. Recorded data on the
microSD memory card will be deleted when formatted. If an unformatted microSD memory
card or a microSD memory card formatted with other devices is used, this product may not
work properly or performance deterioration may be caused. Refer to the Operating
instructions on our support website for how to format a microSD memory card.
• When some microSD memory cards are used with this product, the product may not work
properly or performance deterioration may be caused. Use a microSD memory card dedicated
to i-PRO cameras.
IMPORTANT:
• Note that the area around the IR LED
Light in the right figure may be hot
when you turn off the camera and
remove the front portion to take out the
microSD memory card.
IR LED Light
15
SD slot