System Board; Removing The System Board (Single-Color Keyboard) - Dell G15 5530 Owner's Manual

Steps
1. Connect the power-adapter port cable to the system board.
2. Place the power-adapter port into the slot and adhere the power-adapter port cable on the system board.
3. Place the power-adapter port bracket on the power-adapter port and align the screw holes on the power-adapter port
bracket to the screw holes on the palm-rest and keyboard assembly.
4. Replace the two screws (M2x2) that secure the power-adapter port bracket to the palm-rest and keyboard assembly.
Next steps
1. Install the rear cover.
2. Install the base cover.
3. Follow the procedure in

System board

Removing the system board (Single-color keyboard)

NOTE: This procedure is applicable only for computers that are shipped with a single-color keyboard.
Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the rear cover.
5. Remove the solid-state
6. Remove the wireless card.
7. Remove the memory module.
After working inside your
Before working inside your
drive.
computer.
computer.
Removing and installing Field Replaceable Units (FRUs) 63