Installing The Keyboard-Controller Board - Dell G15 5530 Owner's Manual

About this task
NOTE: This procedure is applicable only for computers with a 4-zone keyboard.
Steps
1. Open the latch and disconnect the keyboard-backlight cable from the keyboard-controller board.
2. Open the latch and disconnect the keyboard-controller board cable from the keyboard-controller board.
3. Remove the screw (M2x2) that secures the keyboard-controller board to the palm-rest and keyboard assembly.
4. Lift the keyboard-controller board off the palm-rest and keyboard assembly.

Installing the keyboard-controller board

Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
NOTE: This procedure is applicable only for computers with a 4-zone keyboard.
60 Removing and installing Field Replaceable Units (FRUs)