Power-Adapter Port; Removing The Power-Adapter Port - Dell G15 5530 Owner's Manual

Steps
1. Using the alignment posts, place the keyboard-controller board into the slot on the palm-rest and keyboard assembly.
2. Replace the screw (M2x2) that secures the keyboard-controller board to the palm-rest and keyboard assembly.
3. Connect the keyboard-controller board cable to the keyboard-contoller board and close the latch.
4. Connect the keyboard-backlight cable to the keyboard-contoller board and close the latch.
Next steps
1. Install the battery.
2. Install the base cover.
3. Follow the procedure in

Power-adapter port

Removing the power-adapter port

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the rear cover.
About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the removal
procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing Field Replaceable Units (FRUs) 61