Turning The Camera On And Off; Setting The Date, Time And Date Stamp - Concord Camera 3043 User Manual

To remove the SD card:
Press the memory card into the slot then release. When the card is partially ejected, pull it out.
Note:If the "Memory Full! " warning message appears on the LCD, it means the SD card or
internal memory is full. Please remove the memory card and insert a new one or transfer all
images to your computer.

TURNING THE CAMERA ON AND OFF

Press the Power button to turn the camera on. The green Power lamp will light up, the LCD will turn
on automatically.
After one minute of inactivity, the LCD will automatically power off. Then the camera will automatically
power off after being idled for around 3 minutes by default. To power off the camera sooner, press the
Power button.
SETTING TIME AND DATE STAMP
When you first use your camera or when the batteries are removed for an extended time
(approximately 120 minutes), you will need to set the Date and Time . The date and time information
will be displayed on the picture if date stamp is turned on.
1. Slide the Function switch to
2. Press the MENU button.
3. Press the or
then press the Enter button to enter its sub-menu.
4. Press the or
then press the Enter button.
5. Press the or
changed, and then press the
value.
6. Press the or
press the Enter button to turn the function on.
7. When the setting is completed, press the MENU button to return to capture mode.
(Capture mode).
button to select Ad (Advance), and
button to select Date Time, and
button to highlight the field to be
or button to set the
button to highlight Date stamp, then
10
GETTING STARTED