Running Slide Show - Concord Camera 3043 User Manual

REVIEWING YOUR FILES
shows options as below:
Single
Thumbnails
Slide Show
4. Press the or
• Up to six thumbnail view files appears on the LCD. For video clips, only the first frame can be
seen.
5. Press the or
• The selected picture or video clip is highlighted in blue.
• If total number of the stored picture/video clips exceeds six, you may press the
button to display the thumbnail files in the previous or next screen.
6. Press the Enter button to display selected picture or video clip in full screen.

RUNNING SLIDE SHOW

Start the Slide Show features to sequentially display the images on the camera LCD monitor, on a
television screen, or on any external display devices equipped with a video input port.
1. Slide the Function switch to
2. Press the MENU button.
3. Press the or
4. Press the or
• The slide show will start at once from the first picture or video clips on. Each file will be displayed
once.
Note: Only the first frame of the video clips will be displayed.
5. The slide show will stop automatically when the last file is shown. To stop the slide show sooner,
press the Enter button.
To display one picture each time.
To display up to six files on the LCD at a time.
To play a slide show of all the stored files one by one.
button to select
button to select specific picture/video that is shown in the current screen.
(Playback mode).
button to highlight Vw (View) and then press the Enter button.
button to select (Slide Show) and then press the Enter button.
([Thumbnail]) and then press the Enter button.
19
or