Turning Beep On Or Off; Setting Quick View Interval - Concord Camera 3.1 Megapixels Digital Camera User Manual

TURNING THE BEEP ON OR OFF
The camera provides an option to enable or disable the beep. By default, the beep is turned ON. The camera
beeps in any of the following situations:
• When the camera is powered on.
• After an image is captured. (For this situation, the camera will beep, regardless of the beep setting.)
• When any button is pressed, except the Power Button, the Mode Slide Button and the Zoom Buttons.
To activate/deactivate the beep:
1. In the Setup Menu, press
2. Press to enter its submenu.
3. Press or to highlight the desired selection.
4. Press the OK button to set.
SETTING QUICK VIEW TIME INTERVAL
The camera provides programmable Quick View duration, which is the duration of time for an image to be
displayed immediately after a picture is taken.
Quick View
Off
1 sec (Default)
3 sec
5 sec
How to select Quick View time phrase:
1. In the Setup menu, press
2. Press to enter its submenu.
3. Press or to highlight the desired selection.
4. Press the OK button to set.
SETUP
FORMAT
DATE/TIME SETUP
DIGITAL ZOOM
BEEP
QUICK VIEW
RETURN SELECT
or repeatedly until Beep is highlighted.
Description
No quick view, LCD continues to show live view.
Displays the image for 1 second then resumes to live view.
Displays the image for 3 seconds then resumes to live view.
Displays the image for 5 seconds then resumes to live view.
SETUP
FORMAT
DATE/TIME SETUP
DIGITAL ZOOM
BEEP
QUICK VIEW
RETURN SELECT
or until Quick View is highlighted.
CUSTOMIZING THE CAMERA SETTINGS
BEEP
ON
OFF
RETURN SET
OK
QUICK VIEW
Off
1 Sec
1
3 Sec
3
5 Sec
5
RETURN SET
OK
42