Advertisement
Note:
If you need to stop the vacuuming process, press the
(A7) again.
•
If the vacuum unit (A7) is not placed properly, the vacuuming process will start, but
after 70 seconds it will stop automatically. If this occurs, re-seat the vacuum unit
(A7) correctly and start the vacuuming process again.
Warning:
Never place the vacuum unit (A7) on the lid
the hole in the lid (A3). This can damage both the inner lid (A1) and the vacuum unit (A7)
•
Press the ON/OFF (B11) button to power on the unit. Press the processing button:
JUICE (B4), ICE CRUSH (B5), SAUTE/SOUP (B6), SMOOTHIE EXTRA (B7); or use
the PULSE/EXTRA (B2) button for short pulse processing at maximum power.
•
Once the ingredients are processed, press the ON/OFF (B11) and disconnect the
power cord plug from the power socket.
•
To remove the blender jug (A4) from the motor unit (A6), turn the blender jug (A4)
anti-clockwise until the handle of the blender jug (A4) is aligned with the arrow
symbol, then pull upwards.
•
Remove the vacuum unit (A7) from the vacuum inner lid (A2).
•
To release the pressure in the blender jug (A4) and to remove the lid (A3) from the
blender jug (A4), the vacuum inner lid (A2) is equipped with a silicone valve.
Carefully lift the silicone valve and wait until the pressure inside the blender jug (A4)
equalises to the pressure in the room. The lid (A3) will be released from the edge of
the blender jug (A4).
button on the vacuum unit
(A3)
if you have inserted the inner lid (A1) to
Advertisement
