Advertisement
ASSEMBLY
Automatic vacuum super blender is delivered with accessories that will help you process your
favourite ingredients. You can assemble your vacuum blender either with the large blender
jug (A4) or the storage bottle (A10).
A. Assembling the blender with the large blender jug
•
Before assembling and disassembling the blender, make sure that the motor unit
(A6) is turned off and disconnected from the power socket, and that the rotating
parts are not in motion.
•
Place the motor unit (A6) on a stable, even and dry surface, such as a kitchen
counter.
•
Screw the blade assembly (A5) to the bottom of the blender jug (A4). Make sure
that it is firmly and correctly assembled in order to avoid spilling liquid from the jug.
•
Put the ingredients you want to process into the blender jug (A4). Do not exceed the
maximum level mark (1500ml).
•
Place the lid (A3) on the blender jug.
•
If you use the blender without the vacuum unit (A7), insert the inner lid (A1) into the
hole in the lid (A3).
•
If you use the blender with the vacuum unit (A7), insert the vacuum inner lid (A2)
into the hole in the lid (A3).
•
To place the blender jug (A4) on the motor unit (A6), align the handle of the blender
jug (A4) with the arrow symbol on the motor unit (A6) and turn clockwise until you
feel resistance.
•
If you used the vacuum inner lid (A2), place the vacuum unit (A7) on it. Insert the
power cord plug into the power socket and the blender is ready to use.
Note:
Before each use of the vacuum unit (A7), remove the vacuum unit cover (A13) from the
vacuum unit (A7).
After each use of the vacuum unit (A7), return the vacuum unit cover (A13) to its
original location on the vacuum unit (A7).
To disassemble the unit, follow the assembly steps in reverse order.
Advertisement
