Advertisement
Processing ingredients without vacuuming
•
Assemble the blender as described under A. Assembling the blender with the
large blender jug or under B
depending on the intended use.
•
When you have assembled with the large blender jug (A4), after inserting the power
cord plug into the power socket, the large blender jug icon (B3) will be illuminated
on the display (B1) and the control lights of buttons ON/OFF (B11), PULSE/EXTRA
(B2), JUICE (B4), ICE CRUSH (B5), SAUTE/SOUP (B6), SMOOTHIE EXTRA (B7)
will be illuminated at the same time.
•
When you have assembled with the storage bottle (A10), after inserting the power
cord plug into the power socket, the storage bottle icon (B10) will be illuminated on
the display (B1) and the control lights of buttons ON/OFF (B11), BLEND (B8) and
SMOOTHIE (B9) will be illuminated at the same time.
•
Press shortly the ON/OFF (B11) button. Press the desired processing button or use
the PULSE/EXTRA (B2) button for short pulse processing at maximum power.
•
Once the ingredients are processed, press the ON/OFF (B11) and disconnect the
power cord plug from the power socket.
•
When you have used the large blender jug (A4), to remove it from the motor unit
(A6), turn the blender jug (A4) anti-clockwise until the handle of the blender jug (A4)
is aligned with the arrow symbol, then pull upwards.
•
When you have used the storage bottle (A10), to remove it from the motor unit (A6),
turn the storage bottle (A10) anti-clockwise and then pull it up.
Vacuuming the storage bottle
•
You can vacuum the storage bottle (A10) after having processed the ingredients.
•
Unscrew the blade assembly (A5) from the storage bottle (A10) and attach the
vacuum inner lid (A2).
•
Press the centre point of the vacuum inner lid (A2) and then place the vacuum unit
(A7) atop it.
•
Press the button on the vacuum unit (A7) to automatically connect the vacuum
unit (A7) to the lid (A2) and commence the vacuuming process. During this process,
the edge of the vacuum unit (A7) will be illuminated. Once the bottle is fully
vacuumed, the process automatically stops.
•
Remove the vacuum unit (A7) from the vacuum inner lid (A2).
•
You will need to release the pressure from the storage bottle (A10) to be able to
remove the vacuum inner lid (A2). Carefully lift the silicone valve inside the inner lid
(A2) and wait until the pressure inside the storage bottle (A10) equalises to the
pressure in the room.
.
Assembling the blender with the storage bottle,
Advertisement
