Advertisement
.
B
Assembling the blender with the storage bottle
•
Before assembling and disassembling the blender, make sure that the motor unit
(A6) is turned off and disconnected from the power socket, and that the rotating
parts are not in motion.
•
Place the motor unit (A6) on a stable, even and dry surface, such as a kitchen
counter.
•
Put the ingredients you want to process into the storage bottle (A10). Do not exceed
the maximum level mark (700ml).
•
Screw the blade assembly (A5) to the bottom of the storage bottle (A10). Make sure
that it is firmly and correctly assembled in order to avoid spilling liquid from the jug.
•
Turn the storage bottle (A10) upside down and place it on the motor unit (A6). The
protrusions on the storage bottle (A10) must fit onto the holes in the motor unit (A6).
Turn the storage bottle (A10) clockwise until you feel resistance.
•
Insert the power cord plug into the power socket and the blender is ready to use.
Note:
To disassemble the unit, follow these steps in reverse order.
Note:
The blender is provided by a safety lock that ensures you can only switch on the
appliance if it is correctly assembled.
Advertisement
