Advertisement
•
Do not leave the appliance in continuous operation for longer than 3 minutes.
Before turning it on again, allow it to cool down for at least 10 minutes. When
processing harder foods or thick liquids, do not leave the appliance in continuous
operation for longer than 1 minute. The appliance is equipped with a thermal fuse
protecting the motor from damage in case of overload. If the appliance shuts off
because of the motor being overloaded, disconnect it from the power socket and
allow it cool for at least 30 minutes before operating it again.
•
If ingredients stick to the blade assembly or the inside walls of the blender jug, turn
the appliance off and unplug it from the power supply. Make sure that the blade
assembly has stopped rotating. Remove the blending jug assembly from the motor
unit and turn it over so that the blade assembly points upwards. Remove the blade
assembly and clean the removed parts using a plastic spatula. Assemble the
appliance, plug the power cord into a power socket and continue blending.
•
When handling the blade assembly, be very careful not to injure yourself on its
sharp cutting edge. This applies especially when removing the blade assembly
from the blending jug, when emptying the jug and when cleaning.
•
While the appliance is running, prevent fingers, hands or other objects from
contacting with the blade assembly.
•
The included blending jugs are not intended for heating food in a microwave oven.
•
Always turn off the appliance and disconnect it from the power socket if you will not
be using it and if you will be leaving it without supervision, before assembly,
disassembly, when replacing accessories and before cleaning or moving it.
•
Check that the motor unit is turned off, disconnected from the power socket and
that the rotating parts have come to a complete stop before removing the blending
jug assembly from the motor unit.
Clean the unit according to the instructions in the Cleaning and Care section of
•
the manual. Do not submerge the motor unit or its power cord in water or any other
liquid or wash these parts under running water.
•
Do not place heavy items on the power cord. Make sure that the power cord does
not hang over an edge, or that it is not touching a hot surface.
•
Disconnect the appliance from the power socket by pulling the plug; never pull the
power cord. Otherwise, this could damage the power cord or the socket.
•
Do not use the appliance when it is not functioning properly or showing any signs of
damage. In order to prevent a hazardous situation arising, do not repair the
appliance yourself or modify it in any way. Have all repairs performed at an
authorised service centre.
Notes:
•
Prior to using this appliance, please read the user's manual thoroughly, even in
cases when one has already familiarised themselves with previous use of similar
types of appliances. Only use the appliance in the manner described in the user's
manual. Keep the user's manual in a safe place where it can be easily retrieved for
future reference.
•
It is recommended to save the original cardboard box, packaging material,
purchase receipt and responsibility statement of the vendor or warranty card for at
least the duration of the legal liability for unsatisfactory performance or quality. In
the event of transportation, it is recommended that you pack the appliance in the
original box from the manufacturer.
Advertisement
