CommScope ERA CAP L2 18/21/ 23T/26 F-DC Installation Manual page 43

Use a lint-free wipe drenched with isopropyl alcohol to clean the
connector winding.
4
Use a cotton bud drenched with isopropyl alcohol to clean the lip
of the inner ring.
5
Use a cotton bud drenched with isopropyl alcohol to clean the
inside surface of the inner ring.
6
Use a cotton bud drenched with isopropyl alcohol to clean the
inside of the center conductor spring tines.
7
Remove the protective caps from the unit connector, and then
clean it the same way that you cleaned the cable connector.
8
M0203A9B_uc
© September 2022 CommScope, Inc.
Connect the Cables to the Fiber CAP L2
CommScope ERA ® CAP L2 with Fiber Interface
Page 39