Lift the CAP L2 onto the bracket and align the holes on the CAP L2 with the rear holes of the bracket,
closest to the mounting surface. Ensure that the hanger tab is secure on the bracket.
7
Tighten the CAP L2 M5 screws, provided with the CAP L2, on both sides on the top and bottom at a Torq
of 6.5 Nm.
8
M5 screws
Confirm that the CAP L2 is securely attached to the Wall Mount Bracket.
9
M0203A9B_uc
© September 2022 CommScope, Inc.
Mount the Fiber CAP L2
CommScope ERA
®
CAP L2 with Fiber Interface
Page 23